Some new-brands
| КУ010 | |
 |
The original welding plant is for
semi-automatic welding of rotary bodies in CO2 by solid and tube wire. The welding plant is designed for welding of girth welds of the following joints: - butt-welds with and without grooving of edges; - fillet and lap welds. |
| A-550 | |
 |
A-550 type automatic welder for electroslag welding is designed for one-pass electroslag welding of metals from 50 mm to 450 mm in thickness. The DC welding is done with simultaneous use of one, two or three electrodes with double-sided forced seam forming. |
|
К 1100 | |
|
| |
| КРС-1 | |
 КРС-1 welding machine is designed for in-track flash-butt welding of rails with cross-section area from 6400 mm2 to 12000 mm2 during railways construction and repair, under temperate climate at ambient temperature from -30оС up to +45 оС and 1000 m altitude.
| |
|
ПРСМ-3 (updated) | |
 The machine is designed for the in-track flash-butt welding of rails with cross section from 6400 мм2 up to 12000 мм2 during the railway construction.
| |
|
СПЗ-5 | |
 СПЗ-5 ballast leveling machine is used in the track facilities and is designed for making and final shaping of the track ballast.
| |
|
СЧ-1000 | |
 The machine is designed for cleaning from ballast contaminants at the waysides, station tracks as well as near the platforms with the preliminary lifting and displacement of the railway track.
| |
|
ЛТС-3000К2 automatic mesh welding line | |
 Manufacture of light-weight reinforcing mesh with the width up to 3000 mm made of 3-6 mm diameter round section wire by means of resistance spot welding with cross and longitudinal wire feed from the coil.
| |
|
ЛТС-2650К2 automatic mesh welding line | |
 Manufacture of light-weight reinforcing mesh with the width up to 2650 mm made of 3 – 6 mm diameter round section wire by means of resistance spot welding with cross and longitudinal wire feed from the coil.
| |
|
ЛТС-2400Р2 automatic mesh welding line | |
|
Manufacture of light-weight reinforcing mesh with the width up to 2400 mm made of 4-5 mm diameter round section wire by means of resistance spot welding with cross and longitudinal wire feed from the coil.
| |
|
ЛТС-2000К2 automatic mesh welding line | |
|
Manufacture of light-weight reinforcing mesh with the width up to 2000 mm made of 3-6 mm diameter round section wire by means of resistance spot welding with cross and longitudinal wire feed from the coil.
| |
|
ЛТС-1500Р2 automatic mesh welding line | |
 Manufacture of light-weight reinforcing mesh with the width up to 1500 mm made of 1,8 - 3 mm diameter round section wire by means of resistance spot welding with cross wire feed from the coil.
| |
|
ЛТС-1000К2 automatic mesh welding line | |
 Manufacture of masonry mesh with the width up to 1000 mm made of 3-5 mm diameter round section wire by means of resistance spot welding cross wire feed from the coil.
| |
|
МТМ-200К2 multi-electrode machine for double frames production | |
 Automatic multi-spot welding of double frames for voluminous reinforced concrete constructions made of reinforced bars with maximum diameter of longitudinal wires up to 12 mm.
| |
|
МТМ-2000К1А multi-electrode machine for heavy-weight mesh reinforcement production | |
 The industrial manufacture of heavy-weight bar mats by means of multi-electrode resistance welding of the longitudinal rods with the diameter up to 16 mm and width up to 2000 mm.
| |
|
МТМ-2000К1Б multi-electrode machine for heavy-weight mesh reinforcement production | |
 The industrial manufacture of heavy-weight bar mats by means of multi-electrode resistance welding of the longitudinal rods with the diameter up to 28 mm and width up to 2000 mm.
| |
K1100
welder is designed for flash-butt welding of rails with cross section
area from 5000 mm2 up to 10000 mm2 into long rail strings which also
contain the insulating joints.